Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Modest gains
Author Message
alpha-dog Offline
Member
***

Posts: 123
Joined: Sep 2008
Reputation: 0
Post: #1
Modest gains
I finally wired my EFIE correctly and introduced HHO above the MAS in the resonator. I want to say to those with Hemi trucks that you should splice into the black wire on the o2's ( signal return )( pin 3 ) or corresponding harness wire.
I have a route to and from work that I've been hypermiling on for about 3 months now and know very well. Coasting at the same spots and braking at the same spots, as well as timming stop lights the same way. So my first positive results are 1 1/2 mpg (+)(-) about 1/2 mpg.
My scan gauge should be in tommorrow so I should be able to tune a lot better before going to the next mod.
Russ
11-04-2008 01:24 PM
Find all posts by this user Quote this message in a reply
stl_hemi Offline
Member
***

Posts: 166
Joined: Sep 2008
Reputation: 0
Post: #2
RE: Modest gains
How big is the drycell and how many LPM is it producing? Also how long is your drive to work?

Paul
2004 Dodge Ram 2500 QC Hemi Off Road
5" of lift with 35" Super Swamper SSR's

Trucks forsale
Buying a 2010 Ram 3500 Mega CTD Smile
11-04-2008 03:15 PM
Find all posts by this user Quote this message in a reply
alpha-dog Offline
Member
***

Posts: 123
Joined: Sep 2008
Reputation: 0
Post: #3
RE: Modest gains
I have a dry cell 8"x8" 21 plates. I'm running it low on electrolite right now so I'm only getting 1.5lpm. I'll be changeing my amp meter soon , hopefully for better results. The people at fireinthewater say I should be using 1/2 cup KOH ( or maybe lye ) per gallon of distilled water.
My drive to work is not very far but I do it paying attention to every condition I can. True to hypermiling tradition. At present time I'm beating my old record by 1 1/2 mpg.
My EFIE is set to 230mvdc offset. Also I'm connected to signal/return ( pin 3 ) on the o2 pigtail.
Russ
11-04-2008 03:36 PM
Find all posts by this user Quote this message in a reply
stl_hemi Offline
Member
***

Posts: 166
Joined: Sep 2008
Reputation: 0
Post: #4
RE: Modest gains
Needs more Hydrogen. Atlast 3lpm. That MDS Hemi though should be easier though on gas.
How's you ST fuel tuning going?

Paul
2004 Dodge Ram 2500 QC Hemi Off Road
5" of lift with 35" Super Swamper SSR's

Trucks forsale
Buying a 2010 Ram 3500 Mega CTD Smile
11-04-2008 07:02 PM
Find all posts by this user Quote this message in a reply
alpha-dog Offline
Member
***

Posts: 123
Joined: Sep 2008
Reputation: 0
Post: #5
RE: Modest gains
stl_hemi Wrote:Needs more Hydrogen. Atlast 3lpm. That MDS Hemi though should be easier though on gas.
How's you ST fuel tuning going?

Aeroforce scan gauge should be in tommorrow and it has all the monitor functions on it including STFT.
My dry cell is suppose to produce 4.1 lpm. I think my amp meter is lying to me, so I going to get another one and see about boosting the production up.
Thinking about trying the MAP mod next.
Russ
11-04-2008 07:54 PM
Find all posts by this user Quote this message in a reply
stl_hemi Offline
Member
***

Posts: 166
Joined: Sep 2008
Reputation: 0
Post: #6
RE: Modest gains
Yup I have a Dual aeroforce on the steering colum pod's. Nice gauges.

Paul
2004 Dodge Ram 2500 QC Hemi Off Road
5" of lift with 35" Super Swamper SSR's

Trucks forsale
Buying a 2010 Ram 3500 Mega CTD Smile
11-05-2008 02:57 PM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)