Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NEW RESULTS FROM DRY CELL
Author Message
freddyhho Offline
Member
***

Posts: 74
Joined: Sep 2008
Reputation: 0
Post: #1
NEW RESULTS FROM DRY CELL
After some upgrades made to the dry cell this include:

Go from 1/4 to 3/8 cover plates (polycarbonate)
3mm. to 1/4 holes in the bottom of each plates
1/4 to 3/8 holes in the upper plates (where the gas out)
Go from 4 neutral to 5 neutral
Go from 12 awg to 8awg cables

The Dry Cell works more cooler, and the voltage to each plates goes down from 2.7V to 2.3Volts per plates whit the following results.
13.5volts @ 15 amps = 500ml. in 20 sec.
Temp was 104F and now 95F when hot, and is more easy to fill the inside plates whit water.

This are not the big numbers, but the dry cell becomes much more stable, and I'm running whit another new problem:
The alternator start to work whit a weird behavior, (I don't know if can explain exactly), in the morning when start the pickup, the volts gauge from the board goes to high (almost to the 18V mark) and the alternator made a whistle noise, when more I use the pickup the Voltage goes to normal ratings but the noise is persistent, I'm already go to 2 different auto electric workshop and in one tells me that the Alt. is rated to 70 amps. and in the other rated to 90 amps., but none can tell me exactly the amps pulled by the Alt.
So, if you have some recommendations I'll be all hearings.
Ok I manage to upload a video of the setup, the whistle you listen is made from the alternator, watch the video and make you're opinions and suggestions.
BTW. Sorry for the quality of the video.

http://mx.youtube.com/watch?v=jOucPpRu62Q

1995 Dodge Ram 2500
V8 5.9L 360
Tero Dry Cell 19 plates (3 cells 5 neutrals)
MAP and EFIE Enhancers
Water Vaporizer
Gasoline Vaporizer
(This post was last modified: 01-31-2009 10:26 AM by freddyhho.)
01-31-2009 10:02 AM
Find all posts by this user Quote this message in a reply
thomasbala Offline
Senior Member
****

Posts: 629
Joined: Jun 2008
Reputation: 4
Post: #2
RE: NEW RESULTS FROM DRY CELL
(01-31-2009 10:02 AM)freddyhho Wrote:  Ok I manage to upload a video of the setup, the whistle you listen is made from the alternator, watch the video and make you're opinions and suggestions.
BTW. Sorry for the quality of the video.
3 possibilities: bad bearing, bad diode or stator. On further thought the 18 volts on start up could mean a bad voltage regulator. Do you have an AutoZone, O'Reilry's or some other chain parts store where you can bench test it?
02-01-2009 04:57 PM
Find all posts by this user Quote this message in a reply
freddyhho Offline
Member
***

Posts: 74
Joined: Sep 2008
Reputation: 0
Post: #3
RE: NEW RESULTS FROM DRY CELL
(02-01-2009 04:57 PM)thomasbala Wrote:  
(01-31-2009 10:02 AM)freddyhho Wrote:  Ok I manage to upload a video of the setup, the whistle you listen is made from the alternator, watch the video and make you're opinions and suggestions.
BTW. Sorry for the quality of the video.
3 possibilities: bad bearing, bad diode or stator. On further thought the 18 volts on start up could mean a bad voltage regulator. Do you have an AutoZone, O'Reilry's or some other chain parts store where you can bench test it?

I'm apologize for took to long to answer, but I go out of my town to made a work. Yes indeed thomasbala, I go to Autozone and they don't have how to check the alternator, gonna take to an auto electrician to made the pertinent repairs, right now I'm in the process of finish a second Dry Cell, but the results gonna have to wait, thanks to all.

1995 Dodge Ram 2500
V8 5.9L 360
Tero Dry Cell 19 plates (3 cells 5 neutrals)
MAP and EFIE Enhancers
Water Vaporizer
Gasoline Vaporizer
02-02-2009 03:50 PM
Find all posts by this user Quote this message in a reply
7eviathan Offline
Member
***

Posts: 21
Joined: Jan 2009
Reputation: 0
Post: #4
RE: NEW RESULTS FROM DRY CELL
Freddyhho,

Please can you give me guide of Dry Cell website link? I am intersting in it. Your 20 secs for 500ml sounds good, uh.

I am still learning :-)

Thank you.
02-10-2009 03:08 AM
Find all posts by this user Quote this message in a reply
saltmine Offline
Member
***

Posts: 89
Joined: Aug 2008
Reputation: 0
Post: #5
RE: NEW RESULTS FROM DRY CELL
1/4" and 3/8" holes in the plates? Is that what everybody is using? I have been cutting my plates 6"X6" and punching out 1/2" gas ports in each one. I've been doing this stuff for five years, and I'm still learning :-)
02-15-2009 09:03 AM
Find all posts by this user Quote this message in a reply
freddyhho Offline
Member
***

Posts: 74
Joined: Sep 2008
Reputation: 0
Post: #6
RE: NEW RESULTS FROM DRY CELL
(02-10-2009 03:08 AM)7eviathan Wrote:  Freddyhho,

Please can you give me guide of Dry Cell website link? I am intersting in it. Your 20 secs for 500ml sounds good, uh.

I am still learning :-)

Thank you.

I'm learn about dry cell using the TERO CELL pdf. document, I think you can download from the files section.
(02-15-2009 09:03 AM)saltmine Wrote:  1/4" and 3/8" holes in the plates? Is that what everybody is using? I have been cutting my plates 6"X6" and punching out 1/2" gas ports in each one. I've been doing this stuff for five years, and I'm still learning :-)

It's a matter of how you can build a more efficient dry cell, I'm starting make my cell using 3mm holes for equalization and 1/4 for the upper exit gas, if the cell is not working properly or you see that need a bigger diameter for a proper fluid of gas an water then you have to increase the diameter of the holes.

1995 Dodge Ram 2500
V8 5.9L 360
Tero Dry Cell 19 plates (3 cells 5 neutrals)
MAP and EFIE Enhancers
Water Vaporizer
Gasoline Vaporizer
(This post was last modified: 03-16-2009 04:08 PM by freddyhho.)
03-16-2009 04:02 PM
Find all posts by this user Quote this message in a reply
ptours99 Offline
Member
***

Posts: 162
Joined: Apr 2008
Reputation: 0
Post: #7
RE: NEW RESULTS FROM DRY CELL
if you eliminate the equilization holes it 'll produce more gas .more efficiently

selling an enclosure for the rear of cab semi truck 28''X20''X6'' CUSTOM MADE ALUMINUM TO HOUSE HHO GENERATORS AND INCLUDING A RESERVOIR BUBBLER AND REGULAR BUBBLR ptoures@sbcglobal.net usa only
03-17-2009 04:38 PM
Find all posts by this user Quote this message in a reply
thomasbala Offline
Senior Member
****

Posts: 629
Joined: Jun 2008
Reputation: 4
Post: #8
RE: NEW RESULTS FROM DRY CELL
(03-17-2009 04:38 PM)ptours99 Wrote:  if you eliminate the equilization holes it 'll produce more gas .more efficiently
Ptours:
Will production increase because there's more surface area by eliminating the equalization holes, or is there another rationale?
03-17-2009 05:52 PM
Find all posts by this user Quote this message in a reply
freddyhho Offline
Member
***

Posts: 74
Joined: Sep 2008
Reputation: 0
Post: #9
RE: NEW RESULTS FROM DRY CELL
I'm always think that the equalization holes function was to have a proper level of fluid in all the plates, if eliminate the holes, then how can we do to have a optimum level of water in all the plates?

1995 Dodge Ram 2500
V8 5.9L 360
Tero Dry Cell 19 plates (3 cells 5 neutrals)
MAP and EFIE Enhancers
Water Vaporizer
Gasoline Vaporizer
03-18-2009 10:46 AM
Find all posts by this user Quote this message in a reply
ptours99 Offline
Member
***

Posts: 162
Joined: Apr 2008
Reputation: 0
Post: #10
RE: NEW RESULTS FROM DRY CELL
move the holes up to the same level as the gas holes and it will still do fine
go to his site scroll down on home page see booster with no equalization hole at the bottom.


http://smacksboosters.110mb.com/BB_Smack.html

selling an enclosure for the rear of cab semi truck 28''X20''X6'' CUSTOM MADE ALUMINUM TO HOUSE HHO GENERATORS AND INCLUDING A RESERVOIR BUBBLER AND REGULAR BUBBLR ptoures@sbcglobal.net usa only
03-18-2009 05:36 PM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)