Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Only half LPM, 18 amps
Author Message
jjw2564 Offline
Member
***

Posts: 25
Joined: Feb 2009
Reputation: 0
Post: #1
Only half LPM, 18 amps
I am trying to get some good out put with the smack design. I have 10 plate 2+ on one end and 2- on the other, the others are N. They are 2 1/2inchs by 4 1/4 inches. 1 gallon of mixture in 4inch pvc, after 5 minutes goes from 10 amps to 18 amps and still only half a LPM. Any idea how I can get more output per min, with out going to dry cell. The smack design can work just need help tweeking. Does it help to punch the cell plates? I did not do that there just 316 ss. Is one LPM what is needed to put in a four cylinder. Or is 1 L every two good.
Correction on some of that. I get half a liter per minute. then I tryed it with out my bubbler, witch is 1/4 tube to 3/4 pvc,1 foot long 1/2 filled with water. I put the 1/4 tube into a liter bottle upside down with the head just in the water, so very little restriction. I got great result at 16 amp it emptyed the 1 liter bootle in 1 minute. Does any one know what could be wrong with my bubbler. Why is it restricting my hho from comming out.
(This post was last modified: 02-28-2009 11:09 AM by jjw2564.)
02-28-2009 10:53 AM
Find all posts by this user Quote this message in a reply
Post Reply 


Messages In This Thread
Only half LPM, 18 amps - jjw2564 - 02-28-2009 10:53 AM
RE: Only half LPM, 18 amps - colchiro - 02-28-2009, 11:59 AM
RE: Only half LPM, 18 amps - jjw2564 - 02-28-2009, 01:12 PM
RE: Only half LPM, 18 amps - colchiro - 02-28-2009, 01:55 PM
RE: Only half LPM, 18 amps - jjw2564 - 02-28-2009, 03:02 PM
RE: Only half LPM, 18 amps - colchiro - 02-28-2009, 03:33 PM
RE: Only half LPM, 18 amps - jjw2564 - 02-28-2009, 04:18 PM
RE: Only half LPM, 18 amps - colchiro - 02-28-2009, 06:11 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)