Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Water4Gas REAL results
Author Message
MadScientist Offline
Member
***

Posts: 36
Joined: Oct 2008
Reputation: 0
Post: #1
Water4Gas REAL results
    I started out, as many did, with the Water4Gas (W4G) coil setup. W4G has some updates. They claim 1.5 LPM out of one cell. Here are the updates;
1) Double density coil (to draw more amps), instead of single wire.
2) Anode & Cathode placed closer together (1/4"=6mm).
3) Run 2 cells minimum in series, aprox 6 volts per cell (12v source).
4) 8 teaspoons of baking soda (8 tsp is the saturation point in 1 Qt. of distilled water, so no point in going more than that).
W4G says a single wire design draws 2.2 amps, so W4G hopes for 4 amps per cell running double wire with 8 tsp of baking soda.
1) I decided to go triple density (that's 30' of 316L SS .035" wire).
2) Anode & Cathode are just over 1/8" apart (actually 4mm).
3) I did run 2 cells in series.
I started with 1.5 tsp of baking soda per cell. The cell is a 1 quart mason jar. Car battery at 12.07 volts.
RESULTS; (cells wired in series, cell temp 80F)
Cell#1 / 5.85 volts / 6.9 amps
Cell#2 / 6.05 volts / 7.4 amps
Even though bubbles were very visible off the wires, filling 80% of the jar, there was NO MEASURABLE GAS PRODUCTION.
I cleaned out the cells and did another test with 7.5 tsp in each cell.
RESULTS; (This time with vehicle running = 13.8 volts, cell temp 98F)
Cell#1 / 6.43 volts / 13.6 amps
Cell#2 / 7.35 volts / 17.4 amps
GAS PRODUCTION WAS ONLY .25 LPM per cell MAX! I measured the gas with a hand held 2 LPM Liter Meter. It took quite a while to just fill 1/2 a sandwich baggie with HHO. But it did make a very loud, BANG, when I lit the baggie (at least that part was satisfying). Anyone else have ACTUAL results of a W4G cell production?
11-30-2008 06:09 PM
Find all posts by this user Quote this message in a reply
ghahai ghato Offline
Member
***

Posts: 163
Joined: Apr 2008
Reputation: 3
Post: #2
RE: Water4Gas REAL results
Hi prof,
Honestly, I'm not at all concern about W4G output or efficiency.... I've seen lousier unit giving good impact...
What I really wanna know if it has any impact on fuel economy on your car.

Good Luck.
11-30-2008 06:16 PM
Find all posts by this user Quote this message in a reply
MadScientist Offline
Member
***

Posts: 36
Joined: Oct 2008
Reputation: 0
Post: #3
RE: Water4Gas REAL results
The only reason I did this test was to show some actual numbers on the W4G cell itself, since I haven't seen results posted elsewhere. This is for all those people who have built them and always wondered what the REAL numbers were. These cells have not been installed in a car.
11-30-2008 06:33 PM
Find all posts by this user Quote this message in a reply
pimpa Offline
Member
***

Posts: 105
Joined: Jul 2008
Reputation: 0
Post: #4
RE: Water4Gas REAL results
http://www.fuel-saver.org/showthread.php?tid=2375

actually it is posted here.
11-30-2008 07:06 PM
Find all posts by this user Quote this message in a reply
MadScientist Offline
Member
***

Posts: 36
Joined: Oct 2008
Reputation: 0
Post: #5
RE: Water4Gas REAL results
Right on! Thanks.
11-30-2008 07:45 PM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)